To visualize detailed fabric swatches available in Open House style, visit www.guilfordofmaine.com/patterns/2335-2334
Pour mieux visualiser les échantillons de tissu de la collection Open House, visitez www.guilfordofmaine.com/patterns/2335-2334
Pour mieux visualiser les échantillons de cuir synthétique Premier, visitez www.ennisfabrics.com/products/premier.
Pour mieux visualiser les échantillons de tissu de la collection To the Point, visitez www.guilfordofmaine.com/patterns/4732
To visualize detailed faux leather swatches available in Premier style, visit www.ennisfabrics.com/products/premier
To visualize detailed fabric swatches available in To the Point style, visit www.guilfordofmaine.com/patterns/4732
Hard floor casters are made of urethane (rubber) and provide a smoother ride on a wood, cement or ceramic floor. Carpet casters can be used on a hard floor, but the reverse is much more difficult: urethane casters on carpet will create too much friction and you will have difficulty moving around while sitting in your chair.
The cylinder is the component that allows you to adjust the height of your chair. The standard cylinder allows you to adjust the height of your chair from 17″ to 22″ (43 cm to 56 cm) from the floor to the top of the seat. If you need your chair to go lower than 17″ (43 cm), you should choose the short cylinder, which adjusts the height of the chair from 16″ to 20″ (41 cm to 51 cm).
The Quatra’s multi-function mechanism includes a slide to adjust the depth of the seat, and the standard configuration will fit most people. However, if you are 5’2” (1.57 m) and under, you will need a short seat, and a long seat if you are over 6’2” (1.88 m).
The useable depth of the seat is determined by the backrest blade:
Right back slat = standard seat: 18" (45.5 cm) deep
Inwardly curved backrest slat = short seat: useful depth reduced to 17" (43 cm)
Outward curved backrest slat = long seat: useful depth increased to 19" (48 cm)
The standard 20.5″ wide seat will fit most people. If you are slim and not very wide in the shoulders, then you should opt for a narrow 18.5″ wide seat.
The standard 20″ wide seat will fit the vast majority of people. However, depending on your height and build, another seat size may be more appropriate for you. The table below can help guide you in your choice of seat size:
Size and shape
Small and slender
Corpulent or strong hips
The armrests on office chairs are often too far out, requiring the arms to be spread out to rest on them. It is recommended to work as close to the body as possible: the laterally adjustable armrests can slide inwards, to get closer to the body.
Mesh backrest available in store only
Your chair is delivered unassembled, assembling the components takes 15-20 minutes. You can receive your new chair already fully assembled, with an additional cost of $85.00.